Uniglobal Business

Yeast are unicellular fungi which are used to make bread and other wheat-based products such as dough and dumplings. Also they are useful in production of alcoholic beverages through fermentation. Almost all species of yeasts and fungi grow on BACTASLYDE TBC test kit and there growth may consist either purely of yeasts or purely of fungi or may be mixed. Fungi are aerobic and commonly occur in nature especially in places which are damp where organic matter and oxygen are present. They produce vast numbers of spores and grow continuously without regards to size and shape. Several fungi are domesticated species that are bred or selected according to their capacity to ferment food without producing harmful toxins. The Total Bacterial Count gives a quantitative idea about the presence of microorganisms such as bacteria yeast and mold in a sample. It is also known as Total Viable Count (TVC) Heterotrophic Plate Count (HPC) Heterotrophic Colony Count (HCC) Aerobic Plate Count (APC) Total Plate Count (TPC) or Standard Plate Count (SPC) and it represents the total bacterial load in a given sample. All our range of dip slides enables you to perform the Total Bacterial Count on one side of the slide to reflect the general hygiene condition of a sample.

 

Features

• Microbiology Laboratory Not Required
• Can Be Used by Non-Technical People
• No Need for an Incubator
• Can Be Used at Site Very Effectively

Specification

• No of Tests: 5
• Type: Quantitative
• HSN: 90275090
• Packing: Plastic Case

Escherichia coli (E. coli) are commensal mammalian intestine bacteria and normally live in the intestines of people and animals. E. coli is also called faecal coli and causes infections in humans and animals like diarrhoea, severe abdominal cramps, bloody diarrhoea and vomiting. You may be exposed to E. coli from contaminated water or food, especially raw vegetables and undercooked ground beef. The presence of E. coli in any material, system or process suggests a low standard of hygiene and sewage contamination. Therefore all drinking water standards for E. coli TBC test kits, both National and International, are in terms of E. coli. Viz. (0 E. coli in 100 ml of water.) Only E. coli colonies will grow on the BACTASLYDE E. coli bacteria test kit and colonies will be of yellow colour. Since E. coli is the indicator of faecal contamination even a 10 count is alarming as all national and international standards for E. coli are Zero. The Total Bacterial Count with our coliform test kit gives a quantitative idea about the presence of microorganisms such as bacteria, yeast and mould in a sample. The coliform bacteria test kit is also used for Total Viable Count (TVC) Heterotrophic Plate Count (HPC) Heterotrophic Colony Count (HCC) Aerobic Plate Count (APC) Total Plate Count (TPC) or Standard Plate Count (SPC) and it represents the total bacterial load in a given sample. Our range of E. coli testing kits enables you to perform the Total Bacterial Count on one side of the slide to reflect the general hygiene condition of a sample. Contact us today for a reliable and user-friendly E. coli testing kit that gives accurate readings for the total bacterial count of water.

 

Features

• Microbiology Laboratory Not Required
• Can Be Used by Non-Technical People
• No Need for an Incubator
• Can Be Used at Site Very Effectively

SpecificationNo of Tests: 5

• Type: Quantitative
• HSN: 90275090
• Packing: Plastic Case

The API AMMONIA TEST KIT measures ammonia to help prevent fish loss, as ammonia is the number one stressor and killer of tropical fish. Ammonia is released into an aquarium in the forms of uneaten food, decaying organic matter, and when fish release it through their gills, urine, and solid waste.
The API AMMONIA TEST KIT is a mercury-free, salicylate test for fresh and saltwater fish, and measures ammonia levels from 0 to 8 ppm.
 
Sizes

Contains 130 tests and includes 2 test solutions, easy-to-ready instructions, glass test tube and 2 color charts

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL single reagent based AE409 - CHLORINE TEST KIT (CHLOROSCOPE) comes with a scientifically designed Colour Comparator. The economical Comparator based design not only discern colours easily but also helps to achieve results quickly. This AE409 - CHLORINE TEST KIT (CHLOROSCOPE) is a cost effective and convinent method for periodic monitoring free chlorine in water.. The end point is very sharp and easily discernable by the user. Even a shop floor worker will be able to get desired results with our test kit.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE409
• Range: 0.05 – 5.0 PPM (MG/L)
• No of Tests: 1000
• HSN: 90275090
• Packing: Plastic Case

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand contact time ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL single reagent based AE409 - CHLORINE TEST KIT (CHLOROSCOPE) comes with a scientifically designed Colour Comparator. The economical Comparator based design not only discern colours easily but also helps to achieve results quickly. This AE409 - CHLORINE TEST KIT (CHLOROSCOPE) is a cost effective and convinent method for periodic monitoring free chlorine in water.. The end point is very sharp and easily discernable by the user. Even a shop floor worker will be able to get desired results with our test kit.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE409
• Range: 0.05 – 5.0 PPM (MG/L)
• No of Tests: 1000
• HSN: 90275090
• Packing: Plastic Case

When water passes through or over deposits such as limestone the levels of Calcium and magnesium ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE541 - TOTAL HARDNESS TEST KIT is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE541
• Range: 50 - 1000 PPM (MG/L)
• No of Tests: 500
• HSN: 90275090
• Packing: Plastic Case

• Easily and accurately measure the water conditions in your aquarium
• Scientifically accurate for professional results
• Includes free colour wallchart, riveted colour cards and glass test tubes
• Kit includes over 800 tests
• For freshwater aquariums
• Country of Origin: India

• It’s Smart to be Proactive!
  The best way to keep your aquarium clean is to maintain good water quality. This will keep your fish strong and vibrant, as well as preventing disease.

  How Do I Maintain a Healthy Environment?
  It is important to test your aquarium water weekly to verify good quality in addition to a bi-weekly partial water change of no more than 25% to help reduce toxic buildup, remove debris the filter missed, and replenish the oxygen available to fish.

    Feed Your Fish Daily

  Feed your fish twice daily with API Fish Food which contains nutritionally enhanced proteins, allowing for easy uptake of nutrients and maximum absorption, resulting in less excrement for clear, clean water. Only give the amount of food fish can eat in 2 to 3 minutes depending on the species. Some fish such as bottom feeders and algae eaters will need up to 30 minutes to 2 hours. Take time to observe fish and the water temperature to ensure they are active & healthy.

  Test Water Quality Weekly

  An aquarium is a closed environment and in order for fish to thrive, water must be similar to that which could be found in their natural environment. Poor water quality can cause fish stress, illness and even loss. The 5 common water quality parameters are Ammonia, Nitrite, Nitrate, and pH – all of which may vary over time and all are invisible to the eye which is why it is important to test weekly with API Master Test Kits or API 5-In-1 Test Strips. It is also a good time to add API Stress Zyme to keep your aquarium & gravel clean.

   Change 25% Water Every 2 Weeks

  In a closed aquarium environment there are no natural rivers or streams to carry away debris and other waste materials. It is important to renew 25% of the aquarium water every two weeks. When you change the water, it is important to know that tap water contains chemicals that make it safe for us to drink but harmful for fish, therefore add a water conditioner such as API Stress Coat.

  Restore Your Ecosystem Monthly

  It is important to change your filter media & clean gravel monthly, however in doing so it can disrupt the fragile ecosystem of your aquarium. Use API Quick Start to strengthen it with ‘beneficial’ nitrifying bacteria that will naturally consume toxic compounds and help prevent fish stress. Also recommended when starting a new aquarium or changing the water.

   

AP

Total hardness kit
The No. of Tests – 250
RO plant, softening processes
Total Hardness Test Kit – AE201Product Range: 2-40 & 5-100 mg/l as CaCO4 No of Test: 250

When water passes through or over deposits such as limestone the levels of ca2+ mg2+ and hco3 ions present in the water greatly increase and cause the water to be classified as hard water. Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions. Hardness creates scale deposit problem which lead to energy loss in different industrial systems such as boiler cooling system cause scale formation in plumbing heating appliances and boilers. Measuring total hardness is essential to monitor – softener demineralization RO plant softening processes etc. Our AQUASOL AE201 hardness range is one of the largest available in the market today. It is a premium kit and finds use in almost all industries where water is the most important ingredient/parameter.

Water Hardness is the amount of dissolved calcium and magnesium in the water. Hard water is high in dissolved minerals, both calcium and magnesium. …Total Hardness Test KitTotal hardness is determined by the multivalent cations’ concentrations present in water.

Total hardness is a measurement of the mineral content in a water sample that is irreversible by boiling. Therefore, total hardness can be equivalent to the total calcium and magnesium hardness.

Total Hardness Expressed As The Sum Of The Calcium And Magnesium

When water passes through or over deposits such as limestone, the levels of ca2+, mg2+, and hco3– ions present in the water greatly increase and cause the water to be classified as hard water.

Hardness in water is caused by dissolved minerals and calcium and magnesium ions are usually present in significant concentration along with other divalent ions.

Measuring Total Hardness is Essential

Hardness creates scale deposit problem which lead to energy loss in different industrial systems ,such as boiler, cooling system, cause scale formation in plumbing, heating appliances, and boilers. Measuring total hardness is essential to monitor – softener, demineralization, RO plant, softening processes, etc.

Directions for Use:-

1.Take 25 ml of water sample to be tested in the test jar.

2.Add one spoonful provided herewith) of TH 1 5.

3.Mix contents well to dissolve.

4.Add 10-12 drops:* of TH 2 and mix contents well.

5.If colour turns blue, it indicates there is ‘No Hardness’ in the water

6.If colour turns red, it indicates there is ‘Hardness’.

7.Now drop wise* add TH 3, counting the number of drops while mixing, until the colour changes from red to blue.

If the expected hardness of the test sample is more than 40 ppm, then use TH 4 ‘Analyzing Waters instead of TH Calculations: Total Hardness as ppm CaCO3 =2 x (Number of drops of TH v E= 5 x (Number of drops of TH 4)

The quality of swimming water can make a major difference on the quality of your swimming experience. Without properly balanced water swimmers may suffer a number of complaints from sore itchy eyes to dry skin and hair. In fact water that is contaminated with biological organisms may even cause more serious side effects and illnesses which is why it is so important to regularly check your pool s water quality. Our pool water test kits are designed to check the pH and chlorine of your pool. To ensure the healthiest most sanitary clearest water quality you should be testing your water every day. Swimming pool test kits provide a convenient and simple package for checking all elements of water quality.

Chloride ions are one of the major inorganic anions in water and wastewater. Although high concentrations of chloride in water are not known to be toxic to humans they may corrode metal pipes. It is essential to monitor chloride concentration in boiler systems to prevent damage of metal parts. In high levels chloride can corrode stainless steel and be toxic to plant life. Therefore chloride is one of the very important parameters which is frequently tested and our AQUASOL AE203 – CHLORIDE TEST KIT makes testing easy simple at the same time accurate.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE203
• Range: 10 – 200 & 50 – 1000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Sulphate is a constituent of TDS and may form salts with sodium potassium magnesium and other cations. Sulphate is widely distributed in nature and may be present in natural waters at concentrations ranging from a few to several hundred milligrams per litre. Sulphate can cause scale build-up in water pipes. Sulphates are also food for theAnaerobic slime formers the sulphate reducing bacteria which are responsible for pitting type of corrosion in pipes.The AQUASOL AE219 – SULPHATE TEST KIT is based on titrimetry and is extremely user friendly.

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

A TDS Meter indicates the amount of total dissolved solids (TDS) in a solution. Since dissolved ionized solids like salts and minerals contribute to the conductivity of a solution a TDS Meter measures the conductivity of the solution then converts that figure to an estimated TDS reading. They are known for ascertaining fast and accurate measurement of total dissolved solids in given liquids. This Highrange TDS Meter Aquasol is ideal for testing liquids like natural water drinking water treated water waste water brine solution sea water and soluble salt content in liquids.

Features of Highrange TDS Meter Aquasol

• Microprocessor-based fast reliable and accurate measurements.
• Replaceable Electrode Module
• Waterproof Impact resistant ABS Housing
• Large LCD display for reading convenience
• Easy Single Point Calibration
• Available in a portable pack.

SpecificationHighrange TDS Meter

• Model - AMTDS01
• Measuring Range - 0 to 19990 PPM
• Resolution -10 PPM
• Accuracy - 1%
• Display - 3 Digit
• Power - 3V x 2 Lithium battery CR2032
• Dimension - 33.5 mm x 170 mm
• Weight - 85g
• Electrode - Replaceable