Uniglobal Business

• Total HardWater Test Kit – AE211 – Caco3
• The No. of Tests – 250
  RO plant, softening processes

Total HardWater Test Kit – AE211 – Caco3

When water flows through or comes into contact with deposits like limestone, there is a notable increase in the levels of Ca2+, Mg2+, and HCO3– ions, leading to the categorization of water as hard water. The presence of dissolved minerals, particularly calcium and magnesium ions, is a common cause of water hardness, often accompanied by other divalent ions. The elevated hardness poses challenges, including the formation of scale deposits that can result in energy inefficiencies across various industrial systems such as boilers and cooling systems. This scale formation extends to plumbing, heating appliances, and boilers, necessitating the need for effective monitoring and management of total hardness.

Accurate measurement of total hardness is crucial for overseeing processes like softening, demineralization, RO (reverse osmosis) plants, and other softening procedures. Our AQUASOL hardness range stands out as a premier kit in the market today, offering an extensive selection. This premium kit is widely utilized across diverse industries where water quality is a critical parameter, ensuring effective control and optimization of water hardness in industrial processes.

• 2 in 1 Test Kit for pH and Chlorine. 15 ml test solution in each bottle Testing procedure included

Our Chlorine and pH Test Kit provides pool owners with a low-cost alternative to more expensive testing kits, yet gives up nothing in terms of accuracy. Chlorine and pH Test Kit comes in a handy plastic case and contains everything you need to test your water for delicate pH and chlorine levels, which determines the overall health of your pool. Its liquid formula makes testing quick and easy and saves you money by being refillable. This test kit will make pool maintenance easier and more accurate, saving you time as well as ensuring your pool is operating at peak efficiency.
ANALYSIS INFORMATION -This test indicates the concentration of available Chlorine for bacteria control. -For effective control, the ideal reading is 1.0 to 1.5 Chlorine Test (Cl) 1. Rince the test vial and fill to the mark with a water sample taken 40 cm (18″) below the surface and away from water lines. 2. Add 4 drops of OTO (Orthotolidine) solution. 3. Place the cap on the vial and invert times to mix. 4. Compare your reading with the Cl color. NOTE if your chlorine reading is above 3.0 you may obtain a false result when testing for pH. In this case, lower Cl first before performing any other tests.
INFORMATION -This test indicates the pH condition of the pool water. -For comfortable water, the ideal reading is from 7.2 to 7.6. Propotion of Hydrogen Test(pH) 1. Rince the test vial and fill it to the mark with a water sample taken 40 cm (18″) below the surface and away from water lines. 2. Add 4 drops of Phenol Red solution. 3. Place a cap on the vial and invert several times to mix. 4. Compare your reading with the pH color standards

Ammonia is present in variable concentrations in many surface and groundwater supplies. It is rapidly oxidized by certain bacteria in natural water systems to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia being a source of nitrogen is also a nutrient for algae and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries. Our AE307 – AMMONIA TEST KIT is based on color comparison and results obtained are easily discernable.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE307
• Range: 0.5 – 8.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

Chlorine is the most widely used oxidizing biocide today for disinfection of domestic water supplies as also for the removal of tastes and odours from water. The amount of chlorine required to be added in a water system is determined by chlorine demand, contact time, ph and temperature of the water. Chlorine residual in drinking water indicates that disinfection has been achieved by chlorine and bacteria / viruses that cause diarrheal disease have been eliminated. Also the water is protected from recontamination during storage. Our AQUASOL chlorine test is available Iodometric method and this kit gives very reliable results. Even a shop floor worker will be able to get desired results with our test kit

D.O. is essential for the aquatic plant and animal life. DO is detrimental in boiler systems because it leads to corrosion in boiler systems. DO analysis measures the amount of gaseous oxygen (o2) dissolved in an aqueous solution DO measurement is a tricky business and but our AQUASOL AED08 kit makes testing easy and simple.

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AEDO8
• Range: 0.5 – 8.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

The alkalinity of water is capacity of water to neutralise acid to desired ph. It is mainly a sum of carbonate bicarbonate and hydroxide ions. Salts of weak acids like borate silicate and phosphate may also contribute to alkalinity. Alkalinity is important in the treatment of potable water waste water boiler and cooling water. Our AQUASOL AE204 – ALKALINITY TEST KIT is very easy to use test to gives reliable results.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

• Product Code: AE204
• Range: 10 – 200 & 100 – 2000 PPM (MG/L)
• No of Tests: 300
• HSN: 90275090
• Packing: Plastic Case

Our Aquasol TDS & PH Meter Lite Multi Parameter is a compact design and help to measure pH Conductivity TDS and Temperature at the same time. An important feature of the testers is a replaceable electrode within a reusable tester body. The microprocessor-based meter gives accurate readings in fluctuating temperatures and can be easily calibrated. These meters are cost effective and come encased in a protective carrying pouch for safety and portability.

Supplied in an attractive plastic case along with standard solutions for easy calibration.

Features of Aquasol TDS & PH Meter Lite

• Microprocessor-based fast reliable and accurate measurements.
• Replaceable Electrode Module
• Waterproof Impact resistant ABS Housing
• Large LCD display for reading convenience
• Easy Single Point Calibration
• Available in a portable pack.

Specification

• Model - AMPAL
• pH Range - 0.00 to 14.00
• pH Accuracy - 0.01 pH
• pH Resolution - ±1%
• Conductivity Range - 0 to 19990 μS/cm
• Conductivity Accuracy - 1μS
• Conductivity Resolution - ±2%
• TDS Rang - 0 to 9990 PPM
• TDS accuracy - 1PPM
• TDS Resolution  - ±2%
• Temp Range - 0 to 80 Deg C
• Temp Accuracy - ± 0.2Temp
• Resolution - 0.1 Deg C
• ATC - 0 to 80 ℃
• Dimension - 183 x 37 x 37 mm
• Weight - 90 g

Ammonia is present in variable concentrations in many surface and groundwater supplies. It is rapidly oxidized by certain bacteria in natural water systems to nitrite and nitrate a process that requires the presence of dissolved oxygen. Ammonia being a source of nitrogen is also a nutrient for algae and other forms of plant life and thus contributes to overloading of natural systems and cause pollution. Ammonia is important to be tested in fisheries. Our AE357 - AMMONIA TEST KIT is based on color comparison and results obtained are easily discernable.

 

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE357
• Range: 0.05 - 8.0 PPM (MG/L)
• No of Tests: 250
• HSN: 90275090
• Packing: Plastic Case

Microprocessor based Water & Soil Analysis Kit is a rugged instrument that is supplied complete including a rugged carrying case allowing easy mobility for field works. The UGB-95 features a backlit, dual level LCD display for easy viewing of the measurements. It has an exceponal heavy duty rechargeable baery fied inside. It has Data Storage facility upto 1000 samples with date and me and also has a RS 232 Computer Interface.

Nitrates are inorganic salts that occur as a natural or manmade contaminants in drinking water. High nitrate levels indicate the presence of other pollutants such as bacteria or pesticides as these follow the same path as the nitrate into the water supply. Our AE308 – NITRATE TEST KIT is based on a colour comparison method. It is a very sensitive one and giving distinct colours which are easily comparable with the chart provided.

Features

• Onsite Field Test Kit
• Easy To Follow Procedures
• Based on International Standards (APHA/AWWA/IS)
• Rapid and Accurate and Reliable results
• Available in portable carry case
• Tested and Validated by leading Laboratory
• Economical and long shelf life.

Specification

• Product Code: AE308
• Range: 0.5 – 50 PPM (MG/L)
• No of Tests: 400
• HSN: 90275090
• Packing: Plastic Case