Uniglobal Business

Moisture meters are used to measure the percentage of water in a given substance. This information can be used to determine if the material is ready for use, unexpectedly wet or dry, or otherwise in need of further inspection. Grain Can Be Measured: rapeseed, sesame, soybean meal, cotton, soybean, peanut, barley, rice, sorghum, watermelon seed, paddy, wheat, maize, fodder

Feature:
1. Measuring range: Moisture is 7.5%-50%
2. LCD backlight: You can control see it clearly in a dark environment.
3. Auto power-off: It will be shutdown in 15minutes without any operation.
4. Double sensor for high accuracy and stable performance.
5. Can choose grain species by pressing the key “Varieties”.
6. Includes low battery indication, data hold, deviation adjustment and alarm setting functions.
7. The moisture meter can quickly measure the moisture content in grain.
8. The probe is well protected by a plastic cover, not easy to be damaged.
9. Memory function setting: If the batter was removed, the setting content will never disappear.
10. Measurement 14 kinds: Paddy, Wheat, Corn, Barley, Rice, Sorghum, Feed, Rapeseed, Seed melon, Sesame, Soymeal, Soybean, Peanut, Seed Cotton.

• Easy to Use
•  DIGITAL DISPLAY : Digital display to facilitate reading data, greatly improves work efficiency.
•  ERGONOMIC DESIGNED : Ergonomic designed, making it simple to operate and use, bring much convenience for you.
•  EASY TO CARRY : Compact and portable, easy to carry, greatly improving the applicability.
•  HIGH QUALITY : Digital Moisture Meter made of ABS material, resistant to oxidation and increased service life.
•  MOISTURE MEASUREMENT : Plant moisture meter used to measure grain moisture, ensures fast and accurate measurement.

DO Meter (DO-66APro) type pen type intelligent Dissolved Oxygen Analyzer  is designed to facilitate the user to carry the operation on the spot. The instrument can be divided into two parts: the sensor and electronic unit. The sensor adopts thin film dissolved oxygen electrode. The electronic unit is an integrated operational amplifier + microcomputer chip with automatic temperature compensation function.

Portable
1. The instrument is compact and lightweight.
2. It comes with its own carrying case for easy carrying and storage of the instrument. The suitcase is made of PP plastic, which is tough, impact resistant, solid and durable.

Battery durability
1. Two AAA batteries for longer lasting power, up to about 600 hours of continuous use.
2. The device is equipped with a low voltage alert to make it more user-friendly.
3. When thepoweris about to run out, a prompt will appear on the screen to remind the user to pay attention to the power and replace the battery in time.

Waterproofing
1. The entire body is waterproof except the battery compartment, which better protects the internal circuitry.

Auto calibration
1. The two-point “0%” and “100%” auto-calibration buttons make it easy to calibrate.

Temperature compensation function
1. Automatically recognizes and converts the value of the difference between the actual solution temperature and the standard temperature to ensure more accurate measurement results.

• Measuring range:
• 1. Dissolved oxygen: (0.0~20.0)mg/L
• 2. Temperature: (0 ~ 40) °C
• Basic error:
• 1. Dissolved oxygen: ±0.3mg/L
• 2. Temperature: ±1°C
• LCD
• Automatic temperature compensation, fast response time
• Portable, easy to carry

• Dimensions (mm): Φ40*185 (without electrodes)
• Instrument keyboard description:
• Key Function
• (switch) power on and off.
• CAL calibration key (long press 5 seconds to enter the calibration interface)
• HOLD lock/hold key, Fahrenheit/Celsius temperature conversion key.
• With our factory dissolved oxygen electrode (polarized film type)
• Power supply: 1.5V button battery (4)

LCD screen display with backlight function,lighting display intensifies as the environment lighting condition gets darker

The power button can turn on / off power and backlight; The MIN/MAX button can display MAX / MIN measurement; The HOLD button can hold data

Comes with compact and lightweight design, designed to fit comfortable in your palm,convenient to carry around.

Sound Level Meter with stable performance and high accuracy,perfect for the measurement of Sound level ( 30 dBA – 130 dBA).

Great tool for monitoring noise levels in hotels, conference halls, home theater, hospitals, factories,offices, theaters and any other noise sensitive environments.

• Air velocity & Temperature measurement
• Max/Average/Current air velocity measurement
• °C/°F Temperature unit selection
• Five units of air velocity:M/s,Km/h,ft/min,Knots,mph
• Backlight display,Wind chill indication

• Take 20ml of water & put 4 drops in it. Easy to use squeeze bottle
• Pour 1 inch of Water into the transparent glass ad then put 5 to 8 drops of liquid in it to check the orp is positive or negative.
• Easily portable and simple to use, Instructions for use are included.
• If the water colour will not change than water have +orp. If than water colour will change into pink than water have -orp
• +orp is not good for health

• Display : 0.5” (13mm) 4-digit LCD
• Measurement units Air Velocity : m/s, km/h, ft/min, knots
• Air Flow : CMM (m3/min) CFM (ft3/min)
• Beaufort scale : Force
• Wave Height : m
• Data hold : Max/Min Value
• Data memorized : 24 groups
• Sampling rate : Reading per second approx
• Sensors : air velocity/flow sensor: Conventional angled vane arms and With low-friction ball bearing
• Temperature sensor : Precision thermistor
• Automatic Power off: 0-9 minutes set by users
• Data output : RS232C serial interface
• Operating temperature : 14 to 140 (-10to60)
• Operating humidity : Max. 80% RH
• Power supply : 260g (0.571b) including batteries probe
• Optional accessories : Cable software for RS 232C

The HTC LX-10A Mini Lux Meter is a compact and efficient device designed for measuring light intensity. With a wide range of 0-199999 Lux, it offers versatility for various lighting conditions in indoor and outdoor settings. Its portable design makes it convenient for on-the-go measurements, while the clear display ensures easy readability of results. This lux meter is an essential tool for professionals in lighting design, photography, and environmental monitoring.

1. Data Hold
2. Max/Min
3. Back Light
4. Lux / FC Measurment
5. Spectral range 320 ~ 730nm
6. Auto Power Off (APO 10 Min)

1. Spectral range 320 ~ 730nm
2. Power : AAA 1.5 V X 3
3. Auto Power Off (APO 10 Min)
4. Sensor Type: Silcion Photo-diode and Spectral response filter
5. Temperature: -20.0~60.0ºC
6. Humidity: 0.0% ~ 99.9% RH
7. Length: 138mm
8. Width: 56mm
9. Height:  25mm

• 1 x HTCMini Lux Meter
• 1 x Manual
• 1 x Soft Carry Case

•  Max display: LCD 3-½ digits, 1999 counts, 0.5” high
•  Polarity: Automatic, indicated minus, assumed plus
•  Measure method: double integral A/D switch implement
•  Sampling speed: 2 times per second
•  Overload indication:1” is displayed
•  Operating environment: 0 to 40 at <80% RH
•  Storage environment: -50 to 50 at <85% RH
•  Battery type: 9V battery IEC 6F22, NEDA 1604
•  Static electricity: about 4mA
•  Product size: 230mm x 68mm x 37mm
•  Weight: 240g (including battery

•  1 x Clamp Meter
•  1 x 9V battery
•  1 x Multimeter Probe
•  1 x Carrying Bag
•  1 x Instruction Manual

- Always make sure the Test Probes are fitted in the correct sockets (Specially while measuring AC Voltage )

- Please choose the correct measuring option before you connect the probe. (As a thumb rule always choose the greater value and decrease if required)

- While measuring current, make sure to put the Red Probe in “10A” socket and the measuring connection should be in “Series”

- While measuring all other parameters other than Current (Ampere), the measuring connection should be in “Parallel”

- If by mistake a wrong connection or option is selected and the measurement is initiated, the instrument will Blink / Beep. Remove the connections immediately to restrict the damage to minimum

- The instrument can only be used in conjunction with the probe for the compliance with safety standards. If the probe needs replacing due to damage, the replacement must be of the same type or the same electrical specifications

- Do not exceed the input limits specified for each range

- When the instrument is measuring, do not touch the input terminal not in use

- When a measurement range is uncertain, turn the function/range switch to the maximum range position

To begin, make sure no current is running through the circuit or component you want to test. Switch it off, unplug it from the wall, and remove any batteries.

Plug the black probe into the COM port on your multimeter.

Plug the red probe into the VΩmA port.

Switch on your multimeter, and set the dial to continuity mode (indicated by an icon that looks like a sound wave or wifi).

To complete your continuity test, place one probe at each end of the circuit or component you want to test.

If your circuit is continuous, the screen displays a value of zero (or near zero), and the multimeter beeps.

If the screen displays 1 or OL (open loop), there's no continuity—that is, there's no path for electric current to flow from one probe to the other.

In case of Diode, continuity will be shown only in one direction and not in other.

• It is used for food grain, wheat , maize and oil seeds and vegetable seeds etc.

• Direct reading display for all commodities.
• Room temperature display.
• No arithmetic required

• Model : OC 03
• Product Type : Digital moisture meter
• Brand : Made in India
• Measuring range : 3.5% to 40%
• Accuracy : ±0.2%
• Principle of measurement : Resistance measurements
• Material : Metal
• Display : 3 digit LED
• Moister Range : 8 to 35%
• Temperature Compensation : Automatic
• Range Selection : Automatic
• Operating Temperature : 0-40 Degree Celsius
• Size: 30*17*26
• weight : 10.5 kg (Approx)
• Power : 6 (9volt) dry cells or 230 V, 50 Hz ac through adapter

• Food grains,
• Pulses,
• Oil-seeds,
• Vegetable seeds etc.

The Battery Capacity Voltage Meter does more than measure voltage—it also provides precise battery capacity readings, displaying them as a percentage. With a high-quality LCD screen featuring green backlighting, it ensures a bright and clear display from any viewing angle. Its waterproof PVC film surface enhances durability in various environments, while the responsive, sturdy buttons and buckle design allow for easy, screw-free installation. Perfect for a wide range of applications, this versatile meter is ideal for portable devices, electric vehicles, self-balancing scooters, cleaning machines, and measurement tools.

Material : PCB/HTN
Light Color : Green
Display Range : 8-100V
Applicable Battery Voltage : 12-84V
Compatible Battery : acid battery, lithium battery, iron lithium battery (can be set by yourself.)
Display Mode : LCD

• Long press the Set key, power supply to the product, enter the setup interface
• Press the Set key to select the battery specification (Lead-acid battery(P), Lithium battery (L), Fe battery(F))
• Short press the Function key to select the number of battery strings (increasing for the set button, decreasing for function button)
• Long press the Function key to set s mode.

• Equipped with a switch, you can turn off the power, no power consumption after turning off.
• Accurately display the battery power percentage, voltage, and intuitively grasp the battery usage status.
• When the power value is lower than or equal to 20%, the backlight flashes an alarm.
• Compatible with acid battery, lithium battery, iron lithium battery which can be set by yourself.
• Double button design, easy to set up, can be set in just a few seconds.
• Manually switch battery percentage/voltage/power off
• Automatic recycling display battery capacity/voltage per 2 seconds (Settable)
• 10s delay auto-off (Settable)
• Double discharge curve selection (Settable)

• Material: PCB/HTN
• Light Color: Green
• Display Range: 8-100V
• Applicable Battery Voltage: 12-84V
• Compatible Battery: acid battery, lithium battery,
• iron lithium battery (can be set by yourself.)
• Display Mode: LCD

• Multiple Measurement Modes: This EMF detector can test Electric Field(1V/m~1999V/m) and Magnetic Field(0.01~99.99µT) strength at the same time and Ambient Temperature(32 122 0 50
• The large clear LCD display shows the values for easy reading three at the same time. It does not measure RF Radiation.
• Sound-Light Alarm: When the test result exceeds the safe level ( 40V/m or 0.4µT), the meter will beep an alarm automatically, the screen will turn red and the indicator will be flashing. This lets you know the radiation emitted is high enough to be a concern.
• This meter has a lot of features, Easy to read LCD backlight, Average or peak value reading, One key reading freeze, Return to zero, Switch     Low battery indication, Buzzer switch, Auto turns off after 5 minutes without operation.

HTC Altimeter AL-7010 Digital Barometer designed to accurately measure atmospheric pressure, Altitude, Temperature, Humidity, makes it an essential tool for a wide range of industrial, commercial, and scientific applications. This Pressure Meter features a user-friendly design, ensuring easy operation and setup, even for those with minimal technical expertise.

Applications: Environmental Monitoring, Food Storage, Transportation, HVAC Monitoring, Pharmaceutical Storage, Data Center Monitoring, Research, Development, Museum Industrial Processes, and Archive Conservation

Features of HTC Altimeter Digital Barometer: 

• Barometer for weather monitor will show the Altitude History & Graphical Display
• Total Altitude Gain & Loss to tracks and displays the cumulative altitude changes.
• Max/Min Memory recorded over a set period for altitude and Barometric Pressure tracking
• Barometric Pressure History & Graphical Display
• Low Battery Indicator on its large display.